Subelement A: — Topic :
Question 6A469
Element 6 (Radiotelegraph)A superheterodyne receiver may not successfully be used for reception of frequencies very near the IFfrequency:
Explanation
A superheterodyne receiver converts a desired radio frequency (RF) signal to a fixed Intermediate Frequency (IF) using a mixer and local oscillator. This IF signal is then amplified and processed.
The issue arises when an external, undesired signal exists at or very near the receiver's internal IF frequency. If such a signal is strong enough, it can bypass the initial RF amplifier and mixer stages and directly couple into the IF amplifier. Because this signal has not gone through the mixer, its reception is not dependent on the tuning of the RF amplifier or local oscillator, which are designed to select and convert the *desired* incoming RF signal. This direct path means the receiver's normal tuning controls cannot effectively filter out or tune away from this unwanted signal, leading to interference that is difficult to suppress.
Related Questions
6A467 An incoming signal causing image interference is ____ the IF above or below the frequency to which thereceiver is tuned:6A468 A superheterodyne receiver is adjusted to 2738 kHz. The IF is 475 kHz. What is the grid circuit of thesecond detector tuned to?6A47 The difference between electrical power and electrical energy is:6A470 Some superheterodyne receives employ a crystal-controlled oscillator:6A471 To obtain maximum response to weak CW signals with a superheterodyne receiver: