Question 49G6

The "Mode" control on a dual-trace oscilloscope governs how the signals from its two input channels (Channel 1 and Channel 2) are displayed on the screen. It allows the operator to choose between viewing only Channel 1, only Channel 2, or both channels simultaneously. Common dual-channel modes include "Alt" (alternate sweep, suitable for higher frequencies) which displays each channel on successive sweeps, and "Chop" (rapid switching between channels, suitable for lower frequencies) which displays both within a single sweep. Other modes might include "Add" (displaying the sum of the two signals) or "X-Y" (using one channel for the horizontal axis and the other for the vertical). This control is fundamental for comparing and analyzing two different waveforms side-by-side. * **A) Select a choice between DC or AC input on either channel:** This function is handled by the **AC/DC coupling switch** associated with each individual input channel, not the "Mode" control. * **C) Select the proper time base of either channel:** The **time base** (sweep speed) is set by the "Time/Div" knob, which controls the horizontal sweep rate for the display. * **D) Select the proper frequency compensation for both channels:** Frequency compensation typically refers to adjusting oscilloscope probes or internal amplifiers for accurate signal reproduction, which is not a function of the "Mode" control.